Features:
- Designed for Clear-Com 2-wire party Line Encore series, Extending over Optical Fiber to 0~10 Kilometer.
- the VOL and MIC controls allow you to manage the local audio interface directly from the device.
- Small size and light weight, easy carry
- Plug and play, with hot-pluggable SFP module
Specs
Fiber Optical
Wavelength: 1310/1550nm or 1310nm or 850nm
Output Power: -10~-3dBm
Optical fiber: Single mode Fiber or Multimode Fiber
Rx sensitivity: <-18dBm
Optical connector: 1 x LC or 2 x LC optional
Distance: 0~10KM (SMF Default) or 500 Meters (MMF)
Audio:
Frequency Response: 200Hz to 15 kHz (+/-3dB)
Signal to Noise Ratio:>65dB
Total Harmonic Distortion (THD): <0.5%(at normal operating levels)
Sidetone Adjustment: >45dB (allows the user to adjust how much of their own voice they hear)
Connectors(please check the below drawing)
Transmitter at Camera Side
Interface: 5 pin XLR (Female)
Microphone
Micinputs: with mute and pre-amps
Headphone: with volume up or down
Receiver at Base Station
Interface: 3pin XLR Female/Male: Party line audio for Clearcom (Pin1: GND Pin 2: NC Pin 3: Audio)
General index
Power supply: DC5~12V
Power consumption <5 W
Enclosure Small Size: 113 x 88 x 39 mm
Net weight: 450g /pair (with Power supply
Case Material: Aluminum Alloy
Work Temp: -20°C to 55°C
Storage Temp: -20°C to 70 °C
humidity: 0 ~ 95% (non-condensing)
Package Includes:
1) 1 x Transmitter with SFP module at Camera side
2) 1 x Receiver with SFP module at Station side
3) 2 x Power Supply Adapters
