Feature:
● Extending Panasonic RCP over Optical Fiber Cable to 0~10Km, Adding 1 Channel 3G/HD/SD-SDI over Optic Fiber (12G-SDI optional)
● Support Single-mode, With 1 x LC SFP Module
● Small size and light weight, easy carry; Plug and play
● Be compatible with Panasonic 10 Pin Remote Controller RCU AJ-RC10G, ECU AG-EC4G etc
Introduction
BY-SPNR10-121/2 includes 1 x Transmiter & 1 x Receiver, It has 1 x Channel 3G-SDI Video & Panasonic 10 Pin Remote Controller Data to Fiber over 10Km Single-mode Fiber.
It is connected between Panasonic Camera and AJ-RC10G, so It also helps the users save the long and heavy & expensive wire cable. It breaks through the 50-meters Barrier of remote wire cable.
3G-SDI input/output:
Signal format:SMPTE 424M, 344M, 292M, 259M, DVB-ASI
Data rate:270Mbit/s, 1.48Gbit/s, 2.97Gbit/s
Cable Equalization:
Automatic cable EQ (Belden 1694A cable)
200 m at 2.97 Gbps (FHD), 280 m at 1.485 Gbps (HD)
600 m at 270 Mbps (SD)
SDI interface: BNC 75 Ohm
12G-SDI input/output:
Signal format:SMPTE ST-2082, ST-2081, 424M, 344M, 292M, 259M, DVB-ASI
Data rate:270Mbit/s, 1.48Gbit/s, 2.97Gbit/s, 5.94Gbit/s, 11.88Gbit/s
Cable Equalization:
Automatic cable EQ (Belden 1694A cable)
75 m at 11.88 Gbps (4Kp60 UHD)
120 m at 5.94 Gbps (UHD)
200 m at 2.97 Gbps (FHD)
280 m at 1.485 Gbps (HD)
600 m at 270 Mbps (SD)
Optical
Fiber interface: 1 x LC
Number of transmitter: 1 Ch 3G SDI video (12G-SDI optional) + 1 x Loopout +1 Ch Panasonic 10Pin Remote Control In
Supported Fiber Type: Single-Mode Fiber
Transmitter wavelength:1310 nm for SDI， 1490/1550nm for Remote
Transmitter output power: -6~-1dBm
Number of receiver : 1 Ch 3G SDI video (12G-SDI optional) + 1 x output +1 Ch Panasonic 10Pin Remote Control Out
Receiver sensitivity: -14.4dBm～-1dBm
10 Pin Remote Signal
Connector : 10 Pin Female for Tx, 10 Pin Male for Rx
Standard: Support Panasonic Remote Control protocol
Applicable Remote Controls:
1) RCU AJ-RC10G
2) ECU AG-EC4G
3) etc
General index:
Input power:DC 5~12V
Power consumption:less 3W
Work Temp:-20°C to 70°C
Storage Temp:-40°C to 85°C
humidity:0 ~ 95% (non-condensing)
Case material:Aluminum
Enclosure Small Size: 154 x 104.4 x 28.3 mm
Net weight:1.00Kg /pair
Environmental
Operating Temperature: -20°C ~ +75°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 0% ~ 95% (non-condensing)
MTBF: >100,000 hours
Package:
1. 1 x transmitter with SFP module.
2. 1 x receiver with SFP module
3. 2 x Power Supply Adapters
4. 1 x Manual
Shipment:
Once order received, we will worldwide deliver by DHL Express for about 1 week delivery.
Once order received, we will worldwide deliver by DHL Express for about 1 week delivery.
